SprayMax 1K Filling primer

Description

Application:

Substrates:

• Steel, galvanised steel, aluminium
• GRP
• Cured old paintwork
• Spare parts primer
• Polyester substrates

Pre-treatment:

• Completely remove rust from damaged area
• Sand the surface thoroughly and clean with SprayMax silicone remover
• Damaged area must be free of grease and dust and dry
• Shake the can thoroughly for 2 minutes. Test spray

Spray application:

• Wash primer: 1 = approx. 15μm
• Primer: 1-2 = 15-30μm
• Primer filler: 2-3 = 30-50μm

Drying times:

• Dust dry: 10–12 min
• Touch dry: approx. 15 min
• Sandable: 25 min.
• IR 7 min. (short-wave IR radiation)
• (These specifications refer to a dry film thickness of approx. 30 µm and an ambient temperature of 20°C)

Further processing:

• Wet sanding with P 800 or
• dry sanding with P 400 -500
• Can be wet-on-wet processed after 15-30 minutes of flash-off time

Yield:

• 4–5 m² at 10–15 µm, approx. 2 m² at 25 µm dry film thickness

Storage stability:

• 5 years at 20°C

Notes:

• For professional use only
• Personal protective equipment must be worn (respiratory mask type: A2/P2 protective gloves, e.g. made of latex or nitrile)
• After finishing the painting process, turn the can upside down and spray the valve until empty.
• Dispose of the empty spray cans as recyclable material.

Safety data sheet

Technical data sheet