Polyester repair kit (styrene-reduced)

Description

Properties

• Consisting of polyester repair resin, including hardener, fibreglass mat and plastic lid for mixing resin and hardener.
• Universally applicable
• Contents 250 g | 500 g | 1000 g

Application

• Bridging rust holes, cracks or holes in car bodies, caravans, boats and equipment in the home and garden
• First, thoroughly clean the repair area with P60 (coarse) sandpaper to remove rust, paint residues and grease.
• Then sand and spray on Auto-K corrosion protection primer.
• Mix the required amount of Auto-K polyester repair resin with approx. 2% hardener.
• Place the cut-to-size fibreglass mat on a solid surface (e.g. Resopal or glass) and apply the repair resin mixed with hardener generously with a spatula.
• Coat the repair area with the mixed repair resin as well.
• Place the fibreglass mat on the damaged area and press down firmly with the spatula tool.

Product advantages

• Contains everything you need for cost-effective and professional repair of rust holes, cracks and holes
• Can also be used in model and mould making

Processing times:

• Processing time: 6-8 minutes at 20°C
• Further processing time: 20-30 minutes

Notes:

• The fibreglass mat should be cut to size so that the edges of the repair area are covered by at least 2 cm all around.
• After the drying time, smooth out any remaining unevenness on the outside of the sheet metal with Auto-K filler.
• Please clean any tools used (spatula blade, mixing cup, etc.) immediately after finishing the work (e.g. with acetone/nitro thinner).

Downloads

 Safety data sheet (745460)
Safety data sheet (745461)
Safety data sheet (745462)