Base coat paint set for bicycles
Original price was: 87,80 €.83,40 €Current price is: 83,40 €.
The bicycle paint set with acrylic base coat
Description
Easy Repair:
This set contains all the products you need to completely paint a bicycle.
It is a two-coat base coat paint finish that is sealed with clear coat.
Contents:
- 1 x dasAuto paint spray
- 1 x clear coat
- 1 x Handle
- 1 x silicone remover
- 1 x masking tape
- 2 x P 320 wet sandpaper
- 2 x P 500 wet sandpaper
- 2 x P 800 waterproof sandpaper
Combination pack at a special price:
High-quality acrylic base coat from Glasurit in a spray can, CFC-free, 400 ml, filled by das Auto
The base coat is sealed with clear lacquer. Apply 5 – 7 coats.
The handle – turns the spray can into a spray gun
Sandpaper:
The base coat is sealed with clear lacquer. Apply 5 – 7 coats.
The handle – turns the spray can into a spray gun
Sandpaper:
Instructions for use:
Tips and tricks
Before using the spray can, read and observe the safety instructions carefully!
Surface preparation:
Thoroughly clean the car body of dirt, grease and dust.
Remove any rust.
The surface must be sanded, clean, dry and free of grease.
Prime with an adhesive primer. After thorough drying, sand briefly (P600 sandpaper).
Remove any rust.
The surface must be sanded, clean, dry and free of grease.
Prime with an adhesive primer. After thorough drying, sand briefly (P600 sandpaper).
Painting:
Shake the spray paint well for approx. 3 minutes before use. The spray distance should be approx. 25 cm. Spray on several thin layers at intervals of 3 minutes.
.
.
.
Additional information
| Weight | 1,5 kg |
|---|
