Remove rust from the car

Spot Repair – Partial Paint Repair

🎨 Spot Repair – Partial Paint Repair

Professionally repair small paint damage without complete repainting

🎯
Difficulty
Medium
⏱️
Time
2-4 Hours
💰
Cost
€50-100
📈
Savings
€300-600 vs. Body Shop

Video Tutorial

🛒 Matching Product for This Video

[dasauto_product id=“368832″]

The Problem

Larger scratches, parking damage, or small dents with paint damage require more than just a touch-up pen. The damaged area must be prepared and repaired with spray paint.

With Spot Repair, only the damaged area is painted – not the entire part. This saves time and money!

Here’s How:

1

Preparation

Thoroughly clean the damaged area with silicone remover. Remove loose paint and sand the edges with 800 grit sandpaper.

2

Priming

For areas down to bare metal: First apply rust protection primer, then filler. Let it dry well and sand.

3

Masking

Generously mask off the surrounding area. Use masking film and painter’s tape. The transitions should be able to blend softly.

4

Spraying Base Coat

Apply the base coat in 2-3 thin layers. Let it flash off for 5-10 minutes between coats. Spray distance approx. 20-25 cm.

⚠️ Warning

Don’t apply too thick! Better multiple thin coats than risking runs. With metallic paints, pay attention to consistent spray distance!

💡 Pro Tip

Work in a dust-free environment at 15-25°C temperature. Avoid direct sunlight! Best to work in the garage with the door open.

5

Applying Clear Coat

After 20-30 minutes of flash-off time, apply 2K clear coat in 2-3 layers. The clear coat provides gloss and protection.

6

Finishing

After 24h drying time, you can polish out any dust inclusions with 2000 grit sandpaper (wet) and polishing compound.

Need supplies?

Shop Now →

Ähnliche Beiträge